A chemical process has normal wastage of 5% of input. In a period, 3,500 Kg of material were input and there was no abnormal loss. What quantity of good production was achieved?
Select correct option:
2,175 Kg
2,250 Kg
3,325 Kg
4,425 Kg
Question # 2 of 15 ( Start time: 03:54:54 AM ) Total Marks: 1
Which of the following is/are not associated with ordering costs?
Select correct option:
Interest
Insurance
Opportunity costs
All of the given options
Question # 3 of 15 ( Start time: 03:55:16 AM ) Total Marks: 1
Direct materials cost is Rs. 80,000. Direct labor cost is Rs. 60,000. Factory overhead is Rs. 90,000. Beginning goods in process were Rs. 15,000. The cost of goods manufactured is Rs. 245,000. What is the cost assigned to the ending goods in process?
Select correct option:
Rs. 45,000
Rs. 15,000
Rs. 30,000
There will be no ending Inventory
Question # 4 of 15 ( Start time: 03:56:37 AM ) Total Marks: 1
A method by which the good used are priced out at average cost is known as:
Select correct option:
BCVO
AVCO
c.FIFO
LIFO
Question # 5 of 15 ( Start time: 03:56:55 AM ) Total Marks: 1
A standard rate is paid to the employee when he completed his job:
Select correct option:
In time less than the standard
In standard time
In time more than standard
Both in standard time and more than the standard time
Question # 6 of 15 ( Start time: 03:57:13 AM ) Total Marks: 1
Which of the following is correct?
Select correct option:
Units sold=Opening finished goods units + Units produced – Closing finished goods units
Units Sold = Units produced + Closing finished goods units - Opening finished goods units
Units sold = Sales + Average units of finished goods inventory
Units sold = Sales - Average units of finished goods inventory
Question # 7 of 15 ( Start time: 03:57:45 AM ) Total Marks: 1
Which of the following is sales force payroll incentive?
Select correct option:
Commission
Shift allowance
Over time payment
Bonus
Question # 8 of 15 ( Start time: 03:59:11 AM ) Total Marks: 1
Where the applied FOH cost is greater than the actual FOH cost it is:
Select correct option:
Unfavorable variance
Favorable variance
Normal variance
Budgeted variance
Question # 9 of 15 ( Start time: 03:59:31 AM ) Total Marks: 1
Which of the following statement is correct regarding reasons of variance?
Select correct option:
Difference between capacity level over which overhead absorption rate is calculated & capacity level attained.
Difference between FOH cost budgeted or estimated over which overhead absorption rate and FOH actually incurred.
Diffrence between the actual level which company achived and budget level which company determined.
All of the given
Question # 10 of 15 ( Start time: 03:59:58 AM ) Total Marks: 1
If joint products are to be processed further beyond the point of separation, costs should be assigned to the products on the basis of:
Select correct option:
Adjusted sales value
Ultimate sales value (not sure)
A physical unit of measure
An engineering analysis
Question # 11 of 15 ( Start time: 04:01:06 AM ) Total Marks: 1
Gross pay includes which of the following items?
Select correct option:
Basic pay + bonus pay
Overtime payment + shift allowances
Rent and conveyance allowances
All of the given options
Question # 12 of 15 ( Start time: 04:02:15 AM ) Total Marks: 1
Increase in material Inventory means:
Select correct option:
The ending inventory is greater than opening inventory
The ending inventory is less than opening inventory
Both ending and opening inventories are equal
Can not be determined
Question # 13 of 15 ( Start time: 04:02:42 AM ) Total Marks: 1
All of the following are cases of labor turnover EXCEPT:
Select correct option:
Workers appointed against the vacancy caused due to discharge or quitting of the organization
Workers employed under the expansion schemes of the company
The total change in the composition of labor force
Workers retrenched
Question # 14 of 15 ( Start time: 04:03:00 AM ) Total Marks: 1
Byer produced 20,000 units and their total factory cost was Rs. 450,000,other cost like property tax on factory bulding was Rs. 10,000 included in that cost till year ended the cost of per unit would be:
Select correct option:
Rs.22.5
Rs.23.5
Rs.24.5
Rs.26.5
Question # 15 of 15 ( Start time: 04:03:20 AM ) Total Marks: 1
Alpha company purchased a machine worth Rs 200,000 in the last year.Now that machine can be use in a new project which company has received this year. Now the cost of that machine is to be called:
Select correct option:
Project cost
Sunk cost
Opportunity cost
Relevant cost
Question # 1 of 15 ( Start time: 05:06:54 AM ) Total Marks: 1
EOQ is the order quantity that _________ over our planning horizon
Select correct option:
Minimizes total ordering costs
Minimizes total carrying costs
Minimizes total inventory costs
Minimize the required safety stock
Question # 2 of 15 ( Start time: 05:07:22 AM ) Total Marks: 1
During the month 12,500 units were completed, 1,500 units remained in work in process at 25 percent completed. How many equivalent units are produced?
Select correct option:
12,125 units
12,500 units
12,875 units
14,250 units
Question # 3 of 15 ( Start time: 05:07:53 AM ) Total Marks: 1
Direct materials cost is Rs. 80,000. Direct labor cost is Rs. 60,000. Factory overhead is Rs. 90,000. Beginning goods in process were Rs. 15,000. The cost of goods manufactured is Rs. 245,000. What is the cost assigned to the ending goods in process?
Select correct option:
Rs. 45,000
Rs. 15,000
Rs. 30,000
There will be no ending Inventory
Question # 4 of 15 ( Start time: 05:08:06 AM ) Total Marks: 1
Manufacturing entities classified the inventory in which of three kinds?
Select correct option:
Material inventory,WIP inventory,Finished goods inventory
Material inventory,purchased good inventory,WIP inventory
Material inventory,purchased good inventory,Finished goods inventory
WIP inventory,Finished goods inventory,purchased good inventory
Question # 5 of 15 ( Start time: 05:08:29 AM ) Total Marks: 1
Which of the following is indirect cost?
Select correct option:
The depreciation of machinery
The overtime premium incurred at the specific request of a customer
The hire of tools for a specific job
All of the given options
Question # 6 of 15 ( Start time: 05:09:17 AM ) Total Marks: 1
Which of the following costs is part of the prime cost for manufacturing company?
Select correct option:
Cost of transporting raw materials from the suppliers premises
Wages of factory workers engaged in machine maintenance
Depreciation of truck used for deliveries to customers
Cost of indirect production materials
Question # 7 of 15 ( Start time: 05:09:39 AM ) Total Marks: 1
Differential cost has the behavior of ?
Select correct option:
Fixed cost
Step cost
Variable/semi avriable cost
All of the given options
Question # 8 of 15 ( Start time: 05:09:57 AM ) Total Marks: 1
In furniture manufacturing use of nail, pins, glue, and polish which use to increase its esteem value that cost is treated as:
Select correct option:
Direct material cost
Indirect material cost
FOH cost
Prime cost
Question # 9 of 15 ( Start time: 05:10:16 AM ) Total Marks: 1
All of the following are cases of labor turnover EXCEPT:
Select correct option:
Workers appointed against the vacancy caused due to discharge or quitting of the organization
Workers employed under the expansion schemes of the company
The total change in the composition of labor force
Workers retrenched
Question # 10 of 15 ( Start time: 05:10:25 AM ) Total Marks: 1
Which of the following statements is/are correct?
Select correct option:
A by-product is a product produced at the same time as other products which has a relatively low volume compared with the other products.
Since a by-product is a saleable item it should be separately costed in the process account,and should absorb some of the process costs.
Cost incurred prior to the point of separation are known as common or joint costs. (not Sure)
A by-product is a product produced at the same time as other products which has a relatively high volume compared with the other products.
Question # 11 of 15 ( Start time: 05:11:52 AM ) Total Marks: 1
When 10,000 ending units of work-in-process are 30% completed as to conversion, it means:
Select correct option:
30% of the units are completed
70% of the units are completed
Each unit has been completed to 70% of its final stage
Each of the unit is 30% completed
Question # 12 of 15 ( Start time: 05:12:28 AM ) Total Marks: 1
Merrick Differential system uses----------- rates.
Select correct option:
Two
Three
Four
Five
Question # 13 of 15 ( Start time: 05:12:50 AM ) Total Marks: 1
Examples of industries that would use process costing include all of the following EXCEPT:
Select correct option:
Beverages
Food
Hospitality
Petroleum
Question # 14 of 15 ( Start time: 05:14:14 AM ) Total Marks: 1
The main difference between the profit center and investment center is:
Select correct option:
Decision making
Revenue generation
Cost incurrence
Investment
Question # 15 of 15 ( Start time: 05:14:47 AM ) Total Marks: 1
While calculating the EOQ, number of orders is calculated by:
Select correct option:
Multiplying the required units with cost per order
Dividing required unit by ordered quantity
Multiplying the required units with ordered quantity
Multiplying the ordered quantity with cost per order
Question # 1 of 15 ( Start time: 05:57:29 AM ) Total Marks: 1
Of the following manufacturing operations, which is the best suited to the utilization of a job order system?
Select correct option:
Soft drink bottling operation
Crude oil refining
Plastic molding operation
Cement Production
Question # 2 of 15 ( Start time: 05:58:15 AM ) Total Marks: 1
A method by which the good used are priced out at average cost is known as:
Select correct option:
BCVO
AVCO
c.FIFO
LIFO
Question # 3 of 15 ( Start time: 05:58:37 AM ) Total Marks: 1
Which of the following is the best definition of a by-product?
Select correct option:
A by-product is a product arising from a process where the wastage rate is higher than a defined level
A by-product is a product arising from a process where the sales value is insignificant by comparison with that of the main product or products
A by-product is a product arising from a process where the wastage rate is unpredictable
A by-product is a product arising from a process where the sales value is significant by comparison with that of the main product or products
Question # 4 of 15 ( Start time: 06:00:02 AM ) Total Marks: 1
The difference over the period of time between actual and applied FOH will usually be minimal when the predetermined overhead rate is based on:
Select correct option:
Normal capacity
Designed capacity
Direct Labor hours
Machine hours
Question # 5 of 15 ( Start time: 06:01:28 AM ) Total Marks: 1
Weighted average cost per unit is calculated by which of the following formula?
Select correct option:
Cost of goods issued/number of units issued
Total cost/total units
Cost of goods manufactured/closing units
Cost of goods sold/total units
Question # 6 of 15 ( Start time: 06:02:02 AM ) Total Marks: 1
Direct materials cost is Rs. 80,000. Direct labor cost is Rs. 60,000. Factory overhead is Rs. 90,000. Beginning goods in process were Rs. 15,000. The cost of goods manufactured is Rs. 245,000. What is the cost assigned to the ending goods in process?
Select correct option:
Rs. 45,000
Rs. 15,000
Rs. 30,000
There will be no ending Inventory
Question # 7 of 15 ( Start time: 06:02:09 AM ) Total Marks: 1
A chemical process has normal wastage of 10% of input. In a period, 2,500 Kg of material were input and there was abnormal loss of 75 Kg. What quantity of good production was achieved?
Select correct option:
2,175 kg
2,250 kg
2,425 kg
2,500 kg
Question # 8 of 15 ( Start time: 06:02:42 AM ) Total Marks: 1
If opening inventory of material is Rs.20,000 and closing inventory is Rs. 40,000.the Average inventory amount will be:
Select correct option:
Rs. 40,000
Rs. 30,000
Rs. 20,000
Rs. 10,000
Question # 9 of 15 ( Start time: 06:03:04 AM ) Total Marks: 1
Gross pay less deductions represents all except:
Select correct option:
Net pay
Take home pay
Total pay
Other income (doubted)
Question # 10 of 15 ( Start time: 06:04:21 AM ) Total Marks: 1
The journal entry of purchse of stock under periodic inventory system would be?
Select correct option:
Inventory to Cash
Cash to Purchases
Purchses to Inventory
None of the given options
Question # 11 of 15 ( Start time: 06:05:15 AM ) Total Marks: 1
Which of the following is sales force payroll incentive?
Select correct option:
Commission
Shift allowance
Over time payment
Bonus
Question # 12 of 15 ( Start time: 06:05:24 AM ) Total Marks: 1
A chemical process has normal wastage of 5% of input. In a period, 3,500 Kg of material were input and there was no abnormal loss. What quantity of good production was achieved?
Select correct option:
2,175 Kg
2,250 Kg
3,325 Kg
4,425 Kg
Question # 13 of 15 ( Start time: 06:05:33 AM ) Total Marks: 1
Where the applied FOH cost is greater than the actual FOH cost it is:
Select correct option:
Unfavorable variance
Favorable variance
Normal variance
Budgeted variance
Question # 14 of 15 ( Start time: 06:05:50 AM ) Total Marks: 1
Which of the following is / are element / s of production payroll?
Select correct option:
Direct labor force wages
Administrative wages
Selling wages
All of the given options
Question # 15 of 15 ( Start time: 06:06:12 AM ) Total Marks: 1
In the operations of a plastic toy manufacturer, the cost per equivalent unit is calculated as Rs. 1.60. The equivalent units of output are 50,000. The closing stock is 10,000 units, 40% complete. What will be the value of closing stock?
Select correct option:
Rs. 9,600
Rs. 80,000
Rs. 16,000
Rs. 6,400
Of the following manufacturing operations, which is the best suited to the utilization of a job order system?
Select correct option:
Soft drink bottling operation
Crude oil refining
Plastic molding operation
Cement Production
Question # 2 of 15 ( Start time: 05:58:15 AM ) Total Marks: 1
A method by which the good used are priced out at average cost is known as:
Select correct option:
BCVO
AVCO
c.FIFO
LIFO
Question # 3 of 15 ( Start time: 05:58:37 AM ) Total Marks: 1
Which of the following is the best definition of a by-product?
Select correct option:
A by-product is a product arising from a process where the wastage rate is higher than a defined level
A by-product is a product arising from a process where the sales value is insignificant by comparison with that of the main product or products
A by-product is a product arising from a process where the wastage rate is unpredictable
A by-product is a product arising from a process where the sales value is significant by comparison with that of the main product or products
Question # 4 of 15 ( Start time: 06:00:02 AM ) Total Marks: 1
The difference over the period of time between actual and applied FOH will usually be minimal when the predetermined overhead rate is based on:
Select correct option:
Normal capacity
Designed capacity
Direct Labor hours
Machine hours
Question # 5 of 15 ( Start time: 06:01:28 AM ) Total Marks: 1
Weighted average cost per unit is calculated by which of the following formula?
Select correct option:
Cost of goods issued/number of units issued
Total cost/total units
Cost of goods manufactured/closing units
Cost of goods sold/total units
Question # 6 of 15 ( Start time: 06:02:02 AM ) Total Marks: 1
Direct materials cost is Rs. 80,000. Direct labor cost is Rs. 60,000. Factory overhead is Rs. 90,000. Beginning goods in process were Rs. 15,000. The cost of goods manufactured is Rs. 245,000. What is the cost assigned to the ending goods in process?
Select correct option:
Rs. 45,000
Rs. 15,000
Rs. 30,000
There will be no ending Inventory
Question # 7 of 15 ( Start time: 06:02:09 AM ) Total Marks: 1
A chemical process has normal wastage of 10% of input. In a period, 2,500 Kg of material were input and there was abnormal loss of 75 Kg. What quantity of good production was achieved?
Select correct option:
2,175 kg
2,250 kg
2,425 kg
2,500 kg
Question # 8 of 15 ( Start time: 06:02:42 AM ) Total Marks: 1
If opening inventory of material is Rs.20,000 and closing inventory is Rs. 40,000.the Average inventory amount will be:
Select correct option:
Rs. 40,000
Rs. 30,000
Rs. 20,000
Rs. 10,000
Question # 9 of 15 ( Start time: 06:03:04 AM ) Total Marks: 1
Gross pay less deductions represents all except:
Select correct option:
Net pay
Take home pay
Total pay
Other income (doubted)
Question # 10 of 15 ( Start time: 06:04:21 AM ) Total Marks: 1
The journal entry of purchse of stock under periodic inventory system would be?
Select correct option:
Inventory to Cash
Cash to Purchases
Purchses to Inventory
None of the given options
Question # 11 of 15 ( Start time: 06:05:15 AM ) Total Marks: 1
Which of the following is sales force payroll incentive?
Select correct option:
Commission
Shift allowance
Over time payment
Bonus
Question # 12 of 15 ( Start time: 06:05:24 AM ) Total Marks: 1
A chemical process has normal wastage of 5% of input. In a period, 3,500 Kg of material were input and there was no abnormal loss. What quantity of good production was achieved?
Select correct option:
2,175 Kg
2,250 Kg
3,325 Kg
4,425 Kg
Question # 13 of 15 ( Start time: 06:05:33 AM ) Total Marks: 1
Where the applied FOH cost is greater than the actual FOH cost it is:
Select correct option:
Unfavorable variance
Favorable variance
Normal variance
Budgeted variance
Question # 14 of 15 ( Start time: 06:05:50 AM ) Total Marks: 1
Which of the following is / are element / s of production payroll?
Select correct option:
Direct labor force wages
Administrative wages
Selling wages
All of the given options
Question # 15 of 15 ( Start time: 06:06:12 AM ) Total Marks: 1
In the operations of a plastic toy manufacturer, the cost per equivalent unit is calculated as Rs. 1.60. The equivalent units of output are 50,000. The closing stock is 10,000 units, 40% complete. What will be the value of closing stock?
Select correct option:
Rs. 9,600
Rs. 80,000
Rs. 16,000
Rs. 6,400
Question # 1 of 15 ( Start time: 11:07:46 PM ) Total Marks: 1
Which of the following statement measures the financial position of the entity on particular time?
Select correct option:
Income Statement
Balance Sheet
Cash Flow Statement
Statement of Retained Earning
Question # 2 of 15 ( Start time: 11:08:05 PM ) Total Marks: 1
The Inventory Turn over ration is 5 times and numbers of days in a year is 365.Inventory holding period in days would be
Select correct option:
100 days
73 days
50 days
10 days
Question # 3 of 15 ( Start time: 11:08:51 PM ) Total Marks: 1
Direct material opening inventory add net purchases is called
Select correct option:
Material consumed
Material available for use
Total material purchsed
Material ending inventory
Question # 4 of 15 ( Start time: 11:09:26 PM ) Total Marks: 1
A store ledger card is similar to the ______ .
Select correct option:
Stock ledger
Bin card
Material card
Purchase requsition card
Question # 5 of 15 ( Start time: 11:09:54 PM ) Total Marks: 1
In a repeated distribution method:
Select correct option:
Each service department in turn does not re-allocate its costs to all departments
Each service department in turn and re-allocates its costs to all departments
Each service department in turn and allocates its costs to all departments
Only one service department in turn and re-allocates its costs to all departments
Question # 6 of 15 ( Start time: 11:10:25 PM ) Total Marks: 1
The appropriate journal entry to transfer the cost of completed units from the Work in Process account would involve a credit to Work in Process and a debit to which of the following accounts?
Select correct option:
Income Summary
Raw Materials Inventory
Finished Goods
Manufacturing Summary
Question # 7 of 15 ( Start time: 11:11:00 PM ) Total Marks: 1
When two products are manufactured during a common process, the factor that determine whether the products are joint product or one main product and one is by product is the:
Select correct option:
Potential marketability for each product
Amount of work expended in the production of each product
Relative total sales value of each product
Management policy
Question # 8 of 15 ( Start time: 11:11:45 PM ) Total Marks: 1
Annual requirement is 7800 units; consumption per week is 150 units. Unit price Rs 5, order cost Rs 10 per order. Carrying cost Rs 1 per unit and lead time is 3 week, The Economic order quantity would be:
Select correct option:
395 units
300 units
250 units
150 units
Question # 9 of 15 ( Start time: 11:12:47 PM ) Total Marks: 1
Which of the following items of expense are to be add in FOH cost
Select correct option:
Rent of factory + Head office rent + salaries to factory watchman
Rent of factory + factory lighting bill + Directors salaries
Rent of factory + factory lighting bill + Factory employees salaries
Head office rent + Factory property tax + Factory small tools
Question # 10 of 15 ( Start time: 11:13:45 PM ) Total Marks: 1
Which of the following is the best definition of joint products?
Select correct option:
Joint products are two or more products arising from a process, one of which has a significant sales value
Joint products are the output of a joint venture of two companies, sharing overhead costs equally
Joint products are the output of a joint venture of two companies, where one company agrees to bear all the overhead costs
Joint products are two or more products arising from a process, each of which has a significant sales value
Question # 11 of 15 ( Start time: 11:14:15 PM ) Total Marks: 1
Over applied FOH will always result when a predetermined FOH rate is applied and:
Select correct option:
Production is greater than defined capacity
Actual overhead costs are less than budgeted overhead
Budgeted capacity is less than normal capacity
Actual overhead incurred is less than applied Overhead
Question # 12 of 15 ( Start time: 11:14:54 PM ) Total Marks: 1
The flux method of labor turnover denotes:
Select correct option:
Workers appointed against the vacancy caused due to discharge or quitting of the organization
Workers appointed in replacement of existing employees
Workers employed under the expansion schemes of the company
The total change in the composition of labor force
Question # 13 of 15 ( Start time: 11:15:41 PM ) Total Marks: 1
The difference over the period of time between actual and applied FOH will usually be minimal when the predetermined overhead rate is based on:
Select correct option:
Normal capacity
Designed capacity
Direct Labor hours
Machine hours
Question # 14 of 15 ( Start time: 11:16:28 PM ) Total Marks: 1
In furniture manufacturing use of nail, pins, glue, and polish which use to increase its esteem value that cost is treated as:
Select correct option:
Direct material cost
Indirect material cost
FOH cost
Prime cost
Question # 15 of 15 ( Start time: 11:16:55 PM ) Total Marks: 1
Which of the following loss is expected in manufacturing process and represents a necessary cost of processing the marketable units?
Select correct option:
Operating loss
Abnormal loss
Normal loss
Extraordinary loss
Which of the following statement measures the financial position of the entity on particular time?
Select correct option:
Income Statement
Balance Sheet
Cash Flow Statement
Statement of Retained Earning
Question # 2 of 15 ( Start time: 11:08:05 PM ) Total Marks: 1
The Inventory Turn over ration is 5 times and numbers of days in a year is 365.Inventory holding period in days would be
Select correct option:
100 days
73 days
50 days
10 days
Question # 3 of 15 ( Start time: 11:08:51 PM ) Total Marks: 1
Direct material opening inventory add net purchases is called
Select correct option:
Material consumed
Material available for use
Total material purchsed
Material ending inventory
Question # 4 of 15 ( Start time: 11:09:26 PM ) Total Marks: 1
A store ledger card is similar to the ______ .
Select correct option:
Stock ledger
Bin card
Material card
Purchase requsition card
Question # 5 of 15 ( Start time: 11:09:54 PM ) Total Marks: 1
In a repeated distribution method:
Select correct option:
Each service department in turn does not re-allocate its costs to all departments
Each service department in turn and re-allocates its costs to all departments
Each service department in turn and allocates its costs to all departments
Only one service department in turn and re-allocates its costs to all departments
Question # 6 of 15 ( Start time: 11:10:25 PM ) Total Marks: 1
The appropriate journal entry to transfer the cost of completed units from the Work in Process account would involve a credit to Work in Process and a debit to which of the following accounts?
Select correct option:
Income Summary
Raw Materials Inventory
Finished Goods
Manufacturing Summary
Question # 7 of 15 ( Start time: 11:11:00 PM ) Total Marks: 1
When two products are manufactured during a common process, the factor that determine whether the products are joint product or one main product and one is by product is the:
Select correct option:
Potential marketability for each product
Amount of work expended in the production of each product
Relative total sales value of each product
Management policy
Question # 8 of 15 ( Start time: 11:11:45 PM ) Total Marks: 1
Annual requirement is 7800 units; consumption per week is 150 units. Unit price Rs 5, order cost Rs 10 per order. Carrying cost Rs 1 per unit and lead time is 3 week, The Economic order quantity would be:
Select correct option:
395 units
300 units
250 units
150 units
Question # 9 of 15 ( Start time: 11:12:47 PM ) Total Marks: 1
Which of the following items of expense are to be add in FOH cost
Select correct option:
Rent of factory + Head office rent + salaries to factory watchman
Rent of factory + factory lighting bill + Directors salaries
Rent of factory + factory lighting bill + Factory employees salaries
Head office rent + Factory property tax + Factory small tools
Question # 10 of 15 ( Start time: 11:13:45 PM ) Total Marks: 1
Which of the following is the best definition of joint products?
Select correct option:
Joint products are two or more products arising from a process, one of which has a significant sales value
Joint products are the output of a joint venture of two companies, sharing overhead costs equally
Joint products are the output of a joint venture of two companies, where one company agrees to bear all the overhead costs
Joint products are two or more products arising from a process, each of which has a significant sales value
Question # 11 of 15 ( Start time: 11:14:15 PM ) Total Marks: 1
Over applied FOH will always result when a predetermined FOH rate is applied and:
Select correct option:
Production is greater than defined capacity
Actual overhead costs are less than budgeted overhead
Budgeted capacity is less than normal capacity
Actual overhead incurred is less than applied Overhead
Question # 12 of 15 ( Start time: 11:14:54 PM ) Total Marks: 1
The flux method of labor turnover denotes:
Select correct option:
Workers appointed against the vacancy caused due to discharge or quitting of the organization
Workers appointed in replacement of existing employees
Workers employed under the expansion schemes of the company
The total change in the composition of labor force
Question # 13 of 15 ( Start time: 11:15:41 PM ) Total Marks: 1
The difference over the period of time between actual and applied FOH will usually be minimal when the predetermined overhead rate is based on:
Select correct option:
Normal capacity
Designed capacity
Direct Labor hours
Machine hours
Question # 14 of 15 ( Start time: 11:16:28 PM ) Total Marks: 1
In furniture manufacturing use of nail, pins, glue, and polish which use to increase its esteem value that cost is treated as:
Select correct option:
Direct material cost
Indirect material cost
FOH cost
Prime cost
Question # 15 of 15 ( Start time: 11:16:55 PM ) Total Marks: 1
Which of the following loss is expected in manufacturing process and represents a necessary cost of processing the marketable units?
Select correct option:
Operating loss
Abnormal loss
Normal loss
Extraordinary loss
Dont know the Ans..
Question # 1 of 15 Which of the following is the best definition of joint products?
Select correct option:
Joint products are two or more products arising from a process, one of which has a significant sales value
Joint products are the output of a joint venture of two companies, sharing overhead costs equally
Joint products are the output of a joint venture of two companies, where one company agrees to bear all the overhead costs
Joint products are two or more products arising from a process, each of which has a significant sales value
Question # 2 of 15 In comparing common cost and joint cost:
Select correct option:
The terms can be correctly used interchangeably
Both have the same objective of assigning production cost to cost center
They differ since common cost products or services have been obtained separately
Common cost is sometime used as Joint cost
Question # 3 of 15 Which of the following statement measures the financial position of the entity on particular time?
Select correct option:
Income Statement
Balance Sheet
Cash Flow Statement
Statement of Retained Earning
Question # 6 of 15
In the operations of a plastic toy manufacturer, the cost per equivalent unit is calculated as Rs. 1.60. The equivalent units of output are 50,000. The closing stock is 10,000 units, 40% complete. What will be the value of closing stock?
Select correct option:
Rs. 9,600
Rs. 80,000
Rs. 16,000
Rs. 6,400
Question # 7 of 15 A standard rate is paid to the employee when he completed his job:
Select correct option:
In time less than the standard
In standard time
In time more than standard
Both in standard time and more than the standard time
Question # 8 of 15 During the month 12,500 units were completed, 1,500 units remained in work in process at 25 percent completed. How many equivalent units are produced?
Select correct option:
12,125 units
12,500 units
12,875 units
14,250 units
Question # 9 of 15 Which of the following cannot be used as a base for the determination of overhead absorption rate?
Select correct option:
Number of units produced
Prime cost
Conversion cost
Discount Allowed
Question # 11 of 15 Working hours of labor can be calculated with the help of all except:
Select correct option:
Smart card
Time sheet
Clock card
Store card
Question # 13 of 15 The Process of cost apportionment is carried out so that:
Select correct option:
Cost may be controlled
Cost unit gather overheads as they pass through cost centers
Whole items of cost can be charged to cost centers
Common costs are shared among cost centers
Question # 14 of 15 A method by which the good used are priced out at average cost is known as:
Select correct option:
BCVO
AVCO
c.FIFO
LIFO
Question # 15 of 15
opening WIP 3500 units that was 70%completed. completed during the month was19,000 units.Closing WIP 6500 units that was 30%completed. How many units were started during January?
Select correct option:
19,000 units
22,000 units
16,000 units
25,500 units
Question # 1 of 15 Which of the following is the best definition of joint products?
Select correct option:
Joint products are two or more products arising from a process, one of which has a significant sales value
Joint products are the output of a joint venture of two companies, sharing overhead costs equally
Joint products are the output of a joint venture of two companies, where one company agrees to bear all the overhead costs
Joint products are two or more products arising from a process, each of which has a significant sales value
Question # 2 of 15 In comparing common cost and joint cost:
Select correct option:
The terms can be correctly used interchangeably
Both have the same objective of assigning production cost to cost center
They differ since common cost products or services have been obtained separately
Common cost is sometime used as Joint cost
Question # 3 of 15 Which of the following statement measures the financial position of the entity on particular time?
Select correct option:
Income Statement
Balance Sheet
Cash Flow Statement
Statement of Retained Earning
Question # 6 of 15
In the operations of a plastic toy manufacturer, the cost per equivalent unit is calculated as Rs. 1.60. The equivalent units of output are 50,000. The closing stock is 10,000 units, 40% complete. What will be the value of closing stock?
Select correct option:
Rs. 9,600
Rs. 80,000
Rs. 16,000
Rs. 6,400
Question # 7 of 15 A standard rate is paid to the employee when he completed his job:
Select correct option:
In time less than the standard
In standard time
In time more than standard
Both in standard time and more than the standard time
Question # 8 of 15 During the month 12,500 units were completed, 1,500 units remained in work in process at 25 percent completed. How many equivalent units are produced?
Select correct option:
12,125 units
12,500 units
12,875 units
14,250 units
Question # 9 of 15 Which of the following cannot be used as a base for the determination of overhead absorption rate?
Select correct option:
Number of units produced
Prime cost
Conversion cost
Discount Allowed
Question # 11 of 15 Working hours of labor can be calculated with the help of all except:
Select correct option:
Smart card
Time sheet
Clock card
Store card
Question # 13 of 15 The Process of cost apportionment is carried out so that:
Select correct option:
Cost may be controlled
Cost unit gather overheads as they pass through cost centers
Whole items of cost can be charged to cost centers
Common costs are shared among cost centers
Question # 14 of 15 A method by which the good used are priced out at average cost is known as:
Select correct option:
BCVO
AVCO
c.FIFO
LIFO
Question # 15 of 15
opening WIP 3500 units that was 70%completed. completed during the month was19,000 units.Closing WIP 6500 units that was 30%completed. How many units were started during January?
Select correct option:
19,000 units
22,000 units
16,000 units
25,500 units
Question # 1 of 15 ( Start time: 10:52:11 PM ) Total Marks: 1
The FIFO inventory costing method (when using a perpetual inventory system) assumes that the cost of the earliest units purchased is allocated in which of the following ways?
Select correct option:
First to be allocated to the ending inventory
Last to be allocated to the cost of goods sold
Last to be allocated to the ending inventory
First to be allocated to the cost of good sold
Question # 2 of 15 ( Start time: 10:53:09 PM ) Total Marks: 1
Which of the following is the best definition of joint products?
Select correct option:
Joint products are two or more products arising from a process, one of which has a significant sales value
Joint products are the output of a joint venture of two companies, sharing overhead costs equally
Joint products are the output of a joint venture of two companies, where one company agrees to bear all the overhead costs
Joint products are two or more products arising from a process, each of which has a significant sales value
Question # 3 of 15 ( Start time: 10:53:45 PM ) Total Marks: 1
Which of the following best describes the manufacturing costs?
Select correct option:
Direct materials, direct labor and factory overhead
Direct materials and direct labor
Direct materials, direct labor, factory overhead, and administrative overhead
Direct labor and factory overhead
Question # 4 of 15 ( Start time: 10:54:35 PM ) Total Marks: 1
When two products are manufactured during a common process, the factor that determine whether the products are joint product or one main product and one is by product is the:
Select correct option:
Potential marketability for each product
Amount of work expended in the production of each product
Relative total sales value of each product
Management policy
Question # 5 of 15 ( Start time: 10:55:39 PM ) Total Marks: 1
Direct materials cost is Rs. 80,000. Direct labor cost is Rs. 60,000. Factory overhead is Rs. 90,000. Beginning goods in process were Rs. 15,000. The cost of goods manufactured is Rs. 245,000. What is the cost assigned to the ending goods in process?
Select correct option:
Rs. 45,000
Rs. 15,000
Rs. 30,000
There will be no ending Inventory
Question # 6 of 15 ( Start time: 10:56:24 PM ) Total Marks: 1
If a predetermined FOH rate is not applied and the volume of production is reduced from the planned capacity level, the cost per unit expected to:
Select correct option:
Remain unchanged for fixed cost and increase for variable cost
Increase for fixed cost and remain unchanged for variable cost
Increase for fixed cost and decrease for variable cost
Decrease for both fixed and variable costs
Question # 7 of 15 ( Start time: 10:57:28 PM ) Total Marks: 1
PVC company has ordering quantity 10,000 units.They have storage capacity 20,000 units,The average inventory would be:
Select correct option:
20,000
5,000
10,000
25,000
Question # 8 of 15 ( Start time: 10:58:53 PM ) Total Marks: 1
Which of the following statements concerning job order costing systems is incorrect?
Select correct option:
Cost drivers are those items which cause actual overhead to exceed applied overhead
Job order costing systems are appropriate to both manufacturing and service businesses
Traditionally, direct labor has been a very popular overhead application base
In a service business, indirect costs of providing a service are treated as overhead and applied in a manner similar to that for factory overhead
Question # 9 of 15 ( Start time: 11:00:19 PM ) Total Marks: 1
Store incharge after receiving the material as per the goods received note, places the material at its location and makes an entry in_________ .
Select correct option:
Bin Card
Store Ledger Card
Stock Ledger
None of the given options
Question # 10 of 15 ( Start time: 11:00:50 PM ) Total Marks: 1
In furniture manufacturing use of nail, pins, glue, and polish which use to increase its esteem value that cost is treated as:
Select correct option:
Direct material cost
Indirect material cost
FOH cost
Prime cost
Question # 11 of 15 ( Start time: 11:01:05 PM ) Total Marks: 1
When FOH is under applied and charged to Net profit , the treatment would be:
Select correct option:
Under applied Add net profit
Under applied Less net profit
Under applied Less operating expense
None of the given options
Question # 12 of 15 ( Start time: 11:02:17 PM ) Total Marks: 1
Cost accounting concepts include all of the following EXCEPT:
Select correct option:
Planning
Controlling
Sharing
Costing
Question # 13 of 15 ( Start time: 11:02:46 PM ) Total Marks: 1
A store ledger card is similar to the ________ .
Select correct option:
Stock ledger
Bin card
Material card
Purchase requsition card
Question # 14 of 15 ( Start time: 11:03:41 PM ) Total Marks: 1
In which of the following would there be a difference between financial and managerial accounting?
Select correct option:
Users of the information
Purpose of the information
Flexibility of practices
All of the given options
Question # 15 of 15 ( Start time: 11:04:25 PM ) Total Marks: 1
What will be the impact of normal loss on the overall per unit cost?
Select correct option:
Per unit cost will increase
Per unit cost will decrease
Per unit cost remain unchanged
Normal loss has no relation to unit cost
The FIFO inventory costing method (when using a perpetual inventory system) assumes that the cost of the earliest units purchased is allocated in which of the following ways?
Select correct option:
First to be allocated to the ending inventory
Last to be allocated to the cost of goods sold
Last to be allocated to the ending inventory
First to be allocated to the cost of good sold
Question # 2 of 15 ( Start time: 10:53:09 PM ) Total Marks: 1
Which of the following is the best definition of joint products?
Select correct option:
Joint products are two or more products arising from a process, one of which has a significant sales value
Joint products are the output of a joint venture of two companies, sharing overhead costs equally
Joint products are the output of a joint venture of two companies, where one company agrees to bear all the overhead costs
Joint products are two or more products arising from a process, each of which has a significant sales value
Question # 3 of 15 ( Start time: 10:53:45 PM ) Total Marks: 1
Which of the following best describes the manufacturing costs?
Select correct option:
Direct materials, direct labor and factory overhead
Direct materials and direct labor
Direct materials, direct labor, factory overhead, and administrative overhead
Direct labor and factory overhead
Question # 4 of 15 ( Start time: 10:54:35 PM ) Total Marks: 1
When two products are manufactured during a common process, the factor that determine whether the products are joint product or one main product and one is by product is the:
Select correct option:
Potential marketability for each product
Amount of work expended in the production of each product
Relative total sales value of each product
Management policy
Question # 5 of 15 ( Start time: 10:55:39 PM ) Total Marks: 1
Direct materials cost is Rs. 80,000. Direct labor cost is Rs. 60,000. Factory overhead is Rs. 90,000. Beginning goods in process were Rs. 15,000. The cost of goods manufactured is Rs. 245,000. What is the cost assigned to the ending goods in process?
Select correct option:
Rs. 45,000
Rs. 15,000
Rs. 30,000
There will be no ending Inventory
Question # 6 of 15 ( Start time: 10:56:24 PM ) Total Marks: 1
If a predetermined FOH rate is not applied and the volume of production is reduced from the planned capacity level, the cost per unit expected to:
Select correct option:
Remain unchanged for fixed cost and increase for variable cost
Increase for fixed cost and remain unchanged for variable cost
Increase for fixed cost and decrease for variable cost
Decrease for both fixed and variable costs
Question # 7 of 15 ( Start time: 10:57:28 PM ) Total Marks: 1
PVC company has ordering quantity 10,000 units.They have storage capacity 20,000 units,The average inventory would be:
Select correct option:
20,000
5,000
10,000
25,000
Question # 8 of 15 ( Start time: 10:58:53 PM ) Total Marks: 1
Which of the following statements concerning job order costing systems is incorrect?
Select correct option:
Cost drivers are those items which cause actual overhead to exceed applied overhead
Job order costing systems are appropriate to both manufacturing and service businesses
Traditionally, direct labor has been a very popular overhead application base
In a service business, indirect costs of providing a service are treated as overhead and applied in a manner similar to that for factory overhead
Question # 9 of 15 ( Start time: 11:00:19 PM ) Total Marks: 1
Store incharge after receiving the material as per the goods received note, places the material at its location and makes an entry in_________ .
Select correct option:
Bin Card
Store Ledger Card
Stock Ledger
None of the given options
Question # 10 of 15 ( Start time: 11:00:50 PM ) Total Marks: 1
In furniture manufacturing use of nail, pins, glue, and polish which use to increase its esteem value that cost is treated as:
Select correct option:
Direct material cost
Indirect material cost
FOH cost
Prime cost
Question # 11 of 15 ( Start time: 11:01:05 PM ) Total Marks: 1
When FOH is under applied and charged to Net profit , the treatment would be:
Select correct option:
Under applied Add net profit
Under applied Less net profit
Under applied Less operating expense
None of the given options
Question # 12 of 15 ( Start time: 11:02:17 PM ) Total Marks: 1
Cost accounting concepts include all of the following EXCEPT:
Select correct option:
Planning
Controlling
Sharing
Costing
Question # 13 of 15 ( Start time: 11:02:46 PM ) Total Marks: 1
A store ledger card is similar to the ________ .
Select correct option:
Stock ledger
Bin card
Material card
Purchase requsition card
Question # 14 of 15 ( Start time: 11:03:41 PM ) Total Marks: 1
In which of the following would there be a difference between financial and managerial accounting?
Select correct option:
Users of the information
Purpose of the information
Flexibility of practices
All of the given options
Question # 15 of 15 ( Start time: 11:04:25 PM ) Total Marks: 1
What will be the impact of normal loss on the overall per unit cost?
Select correct option:
Per unit cost will increase
Per unit cost will decrease
Per unit cost remain unchanged
Normal loss has no relation to unit cost
HIF123 here is solved version
Question # 1 of 15 Which of the following is the best definition of joint products?
Select correct option:
Joint products are two or more products arising from a process, one of which has a significant sales value
Joint products are the output of a joint venture of two companies, sharing overhead costs equally
Joint products are the output of a joint venture of two companies, where one company agrees to bear all the overhead costs
Joint products are two or more products arising from a process, each of which has a significant sales value
Question # 2 of 15 In comparing common cost and joint cost:
Select correct option:
The terms can be correctly used interchangeably
Both have the same objective of assigning production cost to cost center
They differ since common cost products or services have been obtained separately Common cost is sometime used as Joint cost
Question # 3 of 15 Which of the following statement measures the financial position of the entity on particular time?
Select correct option:
Income Statement
Balance Sheet
Cash Flow Statement
Statement of Retained Earning
Question # 6 of 15
In the operations of a plastic toy manufacturer, the cost per equivalent unit is calculated as Rs. 1.60. The equivalent units of output are 50,000. The closing stock is 10,000 units, 40% complete. What will be the value of closing stock?
Select correct option:
Rs. 9,600
Rs. 80,000
Rs. 16,000
Rs. 6,400
Question # 7 of 15 A standard rate is paid to the employee when he completed his job:
Select correct option:
In time less than the standard
In standard time
In time more than standard
Both in standard time and more than the standard time
Question # 8 of 15 During the month 12,500 units were completed, 1,500 units remained in work in process at 25 percent completed. How many equivalent units are produced?
Select correct option:
12,125 units
12,500 units
12,875 units
14,250 units
Question # 9 of 15 Which of the following cannot be used as a base for the determination of overhead absorption rate?
Select correct option:
Number of units produced
Prime cost
Conversion cost
Discount Allowed
Question # 11 of 15 Working hours of labor can be calculated with the help of all except:
Select correct option:
Smart card
Time sheet
Clock card
Store card
Question # 13 of 15 The Process of cost apportionment is carried out so that:
Select correct option:
Cost may be controlled
Cost unit gather overheads as they pass through cost centers
Whole items of cost can be charged to cost centers
Common costs are shared among cost centers
Question # 14 of 15 A method by which the good used are priced out at average cost is known as:
Select correct option:
BCVO
AVCO
c.FIFO
LIFO
Question # 15 of 15
opening WIP 3500 units that was 70%completed. completed during the month was19,000 units.Closing WIP 6500 units that was 30%completed. How many units were started during January?
Select correct option:
19,000 units
22,000 units
16,000 units
25,500 units
Question # 1 of 15 Which of the following is the best definition of joint products?
Select correct option:
Joint products are two or more products arising from a process, one of which has a significant sales value
Joint products are the output of a joint venture of two companies, sharing overhead costs equally
Joint products are the output of a joint venture of two companies, where one company agrees to bear all the overhead costs
Joint products are two or more products arising from a process, each of which has a significant sales value
Question # 2 of 15 In comparing common cost and joint cost:
Select correct option:
The terms can be correctly used interchangeably
Both have the same objective of assigning production cost to cost center
They differ since common cost products or services have been obtained separately Common cost is sometime used as Joint cost
Question # 3 of 15 Which of the following statement measures the financial position of the entity on particular time?
Select correct option:
Income Statement
Balance Sheet
Cash Flow Statement
Statement of Retained Earning
Question # 6 of 15
In the operations of a plastic toy manufacturer, the cost per equivalent unit is calculated as Rs. 1.60. The equivalent units of output are 50,000. The closing stock is 10,000 units, 40% complete. What will be the value of closing stock?
Select correct option:
Rs. 9,600
Rs. 80,000
Rs. 16,000
Rs. 6,400
Question # 7 of 15 A standard rate is paid to the employee when he completed his job:
Select correct option:
In time less than the standard
In standard time
In time more than standard
Both in standard time and more than the standard time
Question # 8 of 15 During the month 12,500 units were completed, 1,500 units remained in work in process at 25 percent completed. How many equivalent units are produced?
Select correct option:
12,125 units
12,500 units
12,875 units
14,250 units
Question # 9 of 15 Which of the following cannot be used as a base for the determination of overhead absorption rate?
Select correct option:
Number of units produced
Prime cost
Conversion cost
Discount Allowed
Question # 11 of 15 Working hours of labor can be calculated with the help of all except:
Select correct option:
Smart card
Time sheet
Clock card
Store card
Question # 13 of 15 The Process of cost apportionment is carried out so that:
Select correct option:
Cost may be controlled
Cost unit gather overheads as they pass through cost centers
Whole items of cost can be charged to cost centers
Common costs are shared among cost centers
Question # 14 of 15 A method by which the good used are priced out at average cost is known as:
Select correct option:
BCVO
AVCO
c.FIFO
LIFO
Question # 15 of 15
opening WIP 3500 units that was 70%completed. completed during the month was19,000 units.Closing WIP 6500 units that was 30%completed. How many units were started during January?
Select correct option:
19,000 units
22,000 units
16,000 units
25,500 units
Question # 1 of 15 ( Start time: 04:10:15 AM ) Total Marks: 1
Which of the following is the best characteristic of a by product:
Select correct option:
Is produced from material that would otherwise be of no value
Has a lower selling price than the main product
Is created along with the main product, but its sales value does not cover its production cost
Usually produces a smaller amount of revenue than the main product
Question # 2 of 15 ( Start time: 04:11:36 AM ) Total Marks: 1
When prices are rising over time, which of the following inventory costing methods will result in the lowest gross margin/profits?
Select correct option:
FIFO
LIFO
Weighted Average
Cannot be determined
Question # 3 of 15 ( Start time: 04:11:59 AM ) Total Marks: 1
Cost of goods sold can be calculated as follow
Select correct option:
Cost of goods manufactured Add Opening finished goods inventory Less Closing finished goods inventory
Cost of goods manufactured Less Opening finished goods inventory Less Closing finished goods inventory
Cost of goods manufactured Less Opening finished goods inventory Add Closing finished goods inventory
Cost of goods manufactured Add Opening finished goods inventory Add Closing finished goods inventory
Question # 4 of 15 ( Start time: 04:12:16 AM ) Total Marks: 1
A chemical process has normal wastage of 10% of input. In a period, 2,500 Kg of material were input and there was abnormal loss of 75 Kg. What quantity of good production was achieved?
Select correct option:
2,175 kg
2,250 kg
2,425 kg
2,500 kg
Question # 5 of 15 ( Start time: 04:12:35 AM ) Total Marks: 1
Which of the following is correct for maximum level?
Select correct option:
Reorder level – (Minimum consumption x Lead time) + EOQ
(Maximum consumption x Lead time) – (Minimum consumption x Lead time) + EOQ
[(Maximum consumption - Minimum consumption) Lead time]+ EOQ
All of the given options
Question # 6 of 15 ( Start time: 04:12:56 AM ) Total Marks: 1
Which of the following is NOT true about job order cost sheets?
Select correct option:
Job cost sheets contain direct material costs
Job cost sheets contain actual amounts of factory overhead
Job cost sheet does not contain conversion cost
Job cost sheets contain direct labor costs
Question # 7 of 15 ( Start time: 04:13:19 AM ) Total Marks: 1
Increase in material Inventory means:
Select correct option:
The ending inventory is greater than opening inventory
The ending inventory is less than opening inventory
Both ending and opening inventories are equal
Can not be determined
Question # 8 of 15 ( Start time: 04:13:37 AM ) Total Marks: 1
Which of the following cannot be used as a base for the determination of overhead absorption rate?
Select correct option:
Number of units produced
Prime cost
Conversion cost
Discount Allowed
Question # 9 of 15 ( Start time: 04:13:56 AM ) Total Marks: 1
Net sales = Sales less:
Select correct option:
Sales returns
Sales discounts
Sales returns & allowances
Sales returns & allowances and sales discounts
Question # 10 of 15 ( Start time: 04:14:16 AM ) Total Marks: 1
The Process of cost apportionment is carried out so that:
Select correct option:
Cost may be controlled
Cost unit gather overheads as they pass through cost centers
Whole items of cost can be charged to cost centers
Common costs are shared among cost centers
Question # 11 of 15 ( Start time: 04:14:33 AM ) Total Marks: 1
Which of the following is/are reported in production cost report?
Select correct option:
The costs charged to the department
How the costs were assigned to the output?
The equivalent units of production by the department
All of the given options
Question # 12 of 15 ( Start time: 04:15:04 AM ) Total Marks: 1
Costs which are constant for a relevant range of activity and rise to new constant level once that range exceeded is called:
Select correct option:
A fixed cost
A variable cost
A mixed cost
A step cost
Question # 13 of 15 ( Start time: 04:15:14 AM ) Total Marks: 1
Differential cost has the behavior of ?
Select correct option:
Fixed cost
Step cost
Variable/semi avriable cost
All of the given options
Question # 14 of 15 ( Start time: 04:15:31 AM ) Total Marks: 1
The Process of cost apportionment is carried out so that:
Select correct option:
Cost may be controlled
Cost unit gather overheads as they pass through cost centers
Whole items of cost can be charged to cost centers
Common costs are shared among cost centers
Question # 15 of 15 ( Start time: 04:15:53 AM ) Total Marks: 1
“Taking steps for the fresh purchase of those stocks which have been exhausted and for which requisitions are to be honored in future” is an easy explanation of:
Select correct option:
Overstocking
Under stocking
Replenishment of stock
Acquisition of stock
Which of the following is the best characteristic of a by product:
Select correct option:
Is produced from material that would otherwise be of no value
Has a lower selling price than the main product
Is created along with the main product, but its sales value does not cover its production cost
Usually produces a smaller amount of revenue than the main product
Question # 2 of 15 ( Start time: 04:11:36 AM ) Total Marks: 1
When prices are rising over time, which of the following inventory costing methods will result in the lowest gross margin/profits?
Select correct option:
FIFO
LIFO
Weighted Average
Cannot be determined
Question # 3 of 15 ( Start time: 04:11:59 AM ) Total Marks: 1
Cost of goods sold can be calculated as follow
Select correct option:
Cost of goods manufactured Add Opening finished goods inventory Less Closing finished goods inventory
Cost of goods manufactured Less Opening finished goods inventory Less Closing finished goods inventory
Cost of goods manufactured Less Opening finished goods inventory Add Closing finished goods inventory
Cost of goods manufactured Add Opening finished goods inventory Add Closing finished goods inventory
Question # 4 of 15 ( Start time: 04:12:16 AM ) Total Marks: 1
A chemical process has normal wastage of 10% of input. In a period, 2,500 Kg of material were input and there was abnormal loss of 75 Kg. What quantity of good production was achieved?
Select correct option:
2,175 kg
2,250 kg
2,425 kg
2,500 kg
Question # 5 of 15 ( Start time: 04:12:35 AM ) Total Marks: 1
Which of the following is correct for maximum level?
Select correct option:
Reorder level – (Minimum consumption x Lead time) + EOQ
(Maximum consumption x Lead time) – (Minimum consumption x Lead time) + EOQ
[(Maximum consumption - Minimum consumption) Lead time]+ EOQ
All of the given options
Question # 6 of 15 ( Start time: 04:12:56 AM ) Total Marks: 1
Which of the following is NOT true about job order cost sheets?
Select correct option:
Job cost sheets contain direct material costs
Job cost sheets contain actual amounts of factory overhead
Job cost sheet does not contain conversion cost
Job cost sheets contain direct labor costs
Question # 7 of 15 ( Start time: 04:13:19 AM ) Total Marks: 1
Increase in material Inventory means:
Select correct option:
The ending inventory is greater than opening inventory
The ending inventory is less than opening inventory
Both ending and opening inventories are equal
Can not be determined
Question # 8 of 15 ( Start time: 04:13:37 AM ) Total Marks: 1
Which of the following cannot be used as a base for the determination of overhead absorption rate?
Select correct option:
Number of units produced
Prime cost
Conversion cost
Discount Allowed
Question # 9 of 15 ( Start time: 04:13:56 AM ) Total Marks: 1
Net sales = Sales less:
Select correct option:
Sales returns
Sales discounts
Sales returns & allowances
Sales returns & allowances and sales discounts
Question # 10 of 15 ( Start time: 04:14:16 AM ) Total Marks: 1
The Process of cost apportionment is carried out so that:
Select correct option:
Cost may be controlled
Cost unit gather overheads as they pass through cost centers
Whole items of cost can be charged to cost centers
Common costs are shared among cost centers
Question # 11 of 15 ( Start time: 04:14:33 AM ) Total Marks: 1
Which of the following is/are reported in production cost report?
Select correct option:
The costs charged to the department
How the costs were assigned to the output?
The equivalent units of production by the department
All of the given options
Question # 12 of 15 ( Start time: 04:15:04 AM ) Total Marks: 1
Costs which are constant for a relevant range of activity and rise to new constant level once that range exceeded is called:
Select correct option:
A fixed cost
A variable cost
A mixed cost
A step cost
Question # 13 of 15 ( Start time: 04:15:14 AM ) Total Marks: 1
Differential cost has the behavior of ?
Select correct option:
Fixed cost
Step cost
Variable/semi avriable cost
All of the given options
Question # 14 of 15 ( Start time: 04:15:31 AM ) Total Marks: 1
The Process of cost apportionment is carried out so that:
Select correct option:
Cost may be controlled
Cost unit gather overheads as they pass through cost centers
Whole items of cost can be charged to cost centers
Common costs are shared among cost centers
Question # 15 of 15 ( Start time: 04:15:53 AM ) Total Marks: 1
“Taking steps for the fresh purchase of those stocks which have been exhausted and for which requisitions are to be honored in future” is an easy explanation of:
Select correct option:
Overstocking
Under stocking
Replenishment of stock
Acquisition of stock
Question # 1 of 15 ( Start time: 04:29:30 AM ) Total Marks: 1
The FIFO inventory costing method (when using a perpetual inventory system) assumes that the cost of the earliest units purchased is allocated in which of the following ways?
Select correct option:
First to be allocated to the ending inventory
Last to be allocated to the cost of goods sold
Last to be allocated to the ending inventory
First to be allocated to the cost of good sold
Question # 2 of 15 ( Start time: 04:29:50 AM ) Total Marks: 1
All Indirect cost is charged/record in the head of
Select correct option:
Prime cost
FOH cost
Direct labor cost
None of the given options
Question # 3 of 15 ( Start time: 04:30:11 AM ) Total Marks: 1
A company has calculated that volume variance for a given month was unfavorable. This could have been caused by which of the following factors?
Select correct option:
The number of rejected units was higher than normal
Machine breakdowns were higher than normal
Delays were experienced in the issuing of material to production
All of the given options
Question # 4 of 15 ( Start time: 04:30:19 AM ) Total Marks: 1
Production volume of 1,200 units cost incurred Rs. 10,000 and production volume of 1,400 units cost incurred Rs.20, 000. The variable cost per unit would be?
Select correct option:
Rs. 50.00 per unit
Rs. 8.33 per unit
Rs. 14.20 per unit
Rs. 100 per unit
Question # 5 of 15 ( Start time: 04:30:30 AM ) Total Marks: 1
Examples of industries that would use process costing include all of the following EXCEPT:
Select correct option:
Beverages
Food
Hospitality
Petroleum
Question # 6 of 15 ( Start time: 04:30:37 AM ) Total Marks: 1
All of the following are essential requirements of a good wage system EXCEPT:
Select correct option:
Reduced overhead costs
Reduced per unit variable cost
Increased production
Increased operating costs
Question # 7 of 15 ( Start time: 04:31:03 AM ) Total Marks: 1
In the process costing when labor is charged to production department- I. What would be the journal entry Passed?
Select correct option:
Payroll a/c To W.I.P (Dept-I)
Payroll a/c To W.I.P (Dept-II)
W.I.P (Dept-I) To Payroll a/c
W.I.P (Dept-II) To Payroll a/c
Question # 8 of 15 ( Start time: 04:32:15 AM ) Total Marks: 1
Which of the following is/are reported in production cost report?
Select correct option:
The costs charged to the department
How the costs were assigned to the output?
The equivalent units of production by the department
All of the given options
Question # 9 of 15 ( Start time: 04:32:23 AM ) Total Marks: 1
Taylor's Differential Piece Rate Plan uses-----------piece rates.
Select correct option:
Three
Two
Four
Five
Question # 10 of 15 ( Start time: 04:32:31 AM ) Total Marks: 1
The Inventory Turn over ration is 5 times and numbers of days in a year is 365.Inventory holding period in days would be
Select correct option:
100 days
73 days
50 days
10 days
Question # 11 of 15 ( Start time: 04:32:38 AM ) Total Marks: 1
Which of the following items of expense are to be add in FOH cost
Select correct option:
Rent of factory + Head office rent + salaries to factory watchman
Rent of factory + factory lighting bill + Directors salaries
Rent of factory + factory lighting bill + Factory employees salaries
Head office rent + Factory property tax + Factory small tools
Question # 12 of 15 ( Start time: 04:32:45 AM ) Total Marks: 1
All of the following are terms used to denote Factory Overheads EXCEPT:
Select correct option:
Factory burden
Factory expenses
Manufacturing overhead
Conversion costs
Question # 13 of 15 ( Start time: 04:34:00 AM ) Total Marks: 1
_______ are future costs that effect the current management decision.
Select correct option:
Sunk Cost
Standard Cost
Relevant Cost
Irrelevant Cost
Question # 14 of 15 ( Start time: 04:34:20 AM ) Total Marks: 1
If computational and record-keeping costs are same under both FIFO and weighted average, which of the following method will generally be preferred?
Select correct option:
Weighted Average
FIFO
Hybrid process
Cannot be determined with so little information
Question # 15 of 15 ( Start time: 04:35:44 AM ) Total Marks: 1
Under/Over applied FOH cost can be adjusted in which of the following:
Select correct option:
Entire Production
Cost of Good sold
Net Profit
All of given options
The FIFO inventory costing method (when using a perpetual inventory system) assumes that the cost of the earliest units purchased is allocated in which of the following ways?
Select correct option:
First to be allocated to the ending inventory
Last to be allocated to the cost of goods sold
Last to be allocated to the ending inventory
First to be allocated to the cost of good sold
Question # 2 of 15 ( Start time: 04:29:50 AM ) Total Marks: 1
All Indirect cost is charged/record in the head of
Select correct option:
Prime cost
FOH cost
Direct labor cost
None of the given options
Question # 3 of 15 ( Start time: 04:30:11 AM ) Total Marks: 1
A company has calculated that volume variance for a given month was unfavorable. This could have been caused by which of the following factors?
Select correct option:
The number of rejected units was higher than normal
Machine breakdowns were higher than normal
Delays were experienced in the issuing of material to production
All of the given options
Question # 4 of 15 ( Start time: 04:30:19 AM ) Total Marks: 1
Production volume of 1,200 units cost incurred Rs. 10,000 and production volume of 1,400 units cost incurred Rs.20, 000. The variable cost per unit would be?
Select correct option:
Rs. 50.00 per unit
Rs. 8.33 per unit
Rs. 14.20 per unit
Rs. 100 per unit
Question # 5 of 15 ( Start time: 04:30:30 AM ) Total Marks: 1
Examples of industries that would use process costing include all of the following EXCEPT:
Select correct option:
Beverages
Food
Hospitality
Petroleum
Question # 6 of 15 ( Start time: 04:30:37 AM ) Total Marks: 1
All of the following are essential requirements of a good wage system EXCEPT:
Select correct option:
Reduced overhead costs
Reduced per unit variable cost
Increased production
Increased operating costs
Question # 7 of 15 ( Start time: 04:31:03 AM ) Total Marks: 1
In the process costing when labor is charged to production department- I. What would be the journal entry Passed?
Select correct option:
Payroll a/c To W.I.P (Dept-I)
Payroll a/c To W.I.P (Dept-II)
W.I.P (Dept-I) To Payroll a/c
W.I.P (Dept-II) To Payroll a/c
Question # 8 of 15 ( Start time: 04:32:15 AM ) Total Marks: 1
Which of the following is/are reported in production cost report?
Select correct option:
The costs charged to the department
How the costs were assigned to the output?
The equivalent units of production by the department
All of the given options
Question # 9 of 15 ( Start time: 04:32:23 AM ) Total Marks: 1
Taylor's Differential Piece Rate Plan uses-----------piece rates.
Select correct option:
Three
Two
Four
Five
Question # 10 of 15 ( Start time: 04:32:31 AM ) Total Marks: 1
The Inventory Turn over ration is 5 times and numbers of days in a year is 365.Inventory holding period in days would be
Select correct option:
100 days
73 days
50 days
10 days
Question # 11 of 15 ( Start time: 04:32:38 AM ) Total Marks: 1
Which of the following items of expense are to be add in FOH cost
Select correct option:
Rent of factory + Head office rent + salaries to factory watchman
Rent of factory + factory lighting bill + Directors salaries
Rent of factory + factory lighting bill + Factory employees salaries
Head office rent + Factory property tax + Factory small tools
Question # 12 of 15 ( Start time: 04:32:45 AM ) Total Marks: 1
All of the following are terms used to denote Factory Overheads EXCEPT:
Select correct option:
Factory burden
Factory expenses
Manufacturing overhead
Conversion costs
Question # 13 of 15 ( Start time: 04:34:00 AM ) Total Marks: 1
_______ are future costs that effect the current management decision.
Select correct option:
Sunk Cost
Standard Cost
Relevant Cost
Irrelevant Cost
Question # 14 of 15 ( Start time: 04:34:20 AM ) Total Marks: 1
If computational and record-keeping costs are same under both FIFO and weighted average, which of the following method will generally be preferred?
Select correct option:
Weighted Average
FIFO
Hybrid process
Cannot be determined with so little information
Question # 15 of 15 ( Start time: 04:35:44 AM ) Total Marks: 1
Under/Over applied FOH cost can be adjusted in which of the following:
Select correct option:
Entire Production
Cost of Good sold
Net Profit
All of given options
Question # 1 of 15 ( Start time: 04:48:26 AM ) Total Marks: 1
The supervisor salary is treated as:
Select correct option:
Direct labor cost
Indirect labor cost
Conversion cost
None of the given options
Question # 2 of 15 ( Start time: 04:48:35 AM ) Total Marks: 1
The flux method of labor turnover denotes:
Select correct option:
Workers appointed against the vacancy caused due to discharge or quitting of the organization
Workers appointed in replacement of existing employees
Workers employed under the expansion schemes of the company
The total change in the composition of labor force
Question # 3 of 15 ( Start time: 04:48:55 AM ) Total Marks: 1
In furniture manufacturing use of nail, pins, glue, and polish which use to increase its esteem value that cost is treated as:
Select correct option:
Direct material cost
Indirect material cost
FOH cost
Prime cost
Question # 4 of 15 ( Start time: 04:49:02 AM ) Total Marks: 1
If, Sales = Rs. 600,000 Markup = 20% of cost What would be the value of Gross profit?
Select correct option:
Rs. 200,000
Rs. 100,000
Rs. 580,000
Rs. 740,000
Question # 5 of 15 ( Start time: 04:49:09 AM ) Total Marks: 1
Gross pay less deductions represents all except:
Select correct option:
Net pay
Take home pay
Total pay
Other income
Question # 6 of 15 ( Start time: 04:49:42 AM ) Total Marks: 1
Taylor's Differential Piece Rate Plan uses-----------piece rates.
Select correct option:
Three
Two
Four
Five
Question # 7 of 15 ( Start time: 04:49:49 AM ) Total Marks: 1
If computational and record-keeping costs are same under both FIFO and weighted average, which of the following method will generally be preferred?
Select correct option:
Weighted Average
FIFO
Hybrid process
Cannot be determined with so little information
Question # 8 of 15 ( Start time: 04:50:09 AM ) Total Marks: 1
Which of the following is NOT true about job order cost sheets?
Select correct option:
Job cost sheets contain direct material costs
Job cost sheets contain actual amounts of factory overhead
Job cost sheet does not contain conversion cost
Job cost sheets contain direct labor costs
Question # 9 of 15 ( Start time: 04:50:18 AM ) Total Marks: 1
Amount of net purchase can be calculated as follow
Select correct option:
Purchase of direct material add trade discount less purchase return add carriage inward less other material handling cost
Purchase of direct material less trade discount l add purchase return add carriage inward less other material handling cost
Purchase of direct material less trade discount less purchase return less carriage inward add other material handling cost
Purchase of direct material less trade discount less purchase return add carriage inward add other material handling cost
Question # 10 of 15 ( Start time: 04:51:42 AM ) Total Marks: 1
Under/Over applied FOH cost can be adjusted in which of the following:
Select correct option:
Entire Production
Cost of Good sold
Net Profit
All of given options
Question # 11 of 15 ( Start time: 04:51:52 AM ) Total Marks: 1
Which of the following is considered as basic systems of remunerating labor?
Select correct option:
Time rate system
Piece rate system
Halsey Premium plan
Both time rate and piece rate system
Question # 12 of 15 ( Start time: 04:52:08 AM ) Total Marks: 1
Reduction of labor turnover, accidents, spoilage, waste and absenteeism are the results of which of the following wage plan?
Select correct option:
Piece rate plan
Time rate plan
Differential plan
***** bonus system
Question # 13 of 15 ( Start time: 04:52:50 AM ) Total Marks: 1
A chemical process has normal wastage of 5% of input. In a period, 3,500 Kg of material were input and there was no abnormal loss. What quantity of good production was achieved?
Select correct option:
2,175 Kg
2,250 Kg
3,325 Kg
4,425 Kg
Question # 14 of 15 ( Start time: 04:52:59 AM ) Total Marks: 1
Which of the following is correct?
Select correct option:
Units sold=Opening finished goods units + Units produced – Closing finished goods units
Units Sold = Units produced + Closing finished goods units - Opening finished goods units
Units sold = Sales + Average units of finished goods inventory
Units sold = Sales - Average units of finished goods inventory
Question # 15 of 15 ( Start time: 04:53:06 AM ) Total Marks: 1
A high inventory turnover may indicate:
Select correct option:
An efficient use of the investment in inventory
A high risk of stock-outs
Stock position of store room
All of the given options
The supervisor salary is treated as:
Select correct option:
Direct labor cost
Indirect labor cost
Conversion cost
None of the given options
Question # 2 of 15 ( Start time: 04:48:35 AM ) Total Marks: 1
The flux method of labor turnover denotes:
Select correct option:
Workers appointed against the vacancy caused due to discharge or quitting of the organization
Workers appointed in replacement of existing employees
Workers employed under the expansion schemes of the company
The total change in the composition of labor force
Question # 3 of 15 ( Start time: 04:48:55 AM ) Total Marks: 1
In furniture manufacturing use of nail, pins, glue, and polish which use to increase its esteem value that cost is treated as:
Select correct option:
Direct material cost
Indirect material cost
FOH cost
Prime cost
Question # 4 of 15 ( Start time: 04:49:02 AM ) Total Marks: 1
If, Sales = Rs. 600,000 Markup = 20% of cost What would be the value of Gross profit?
Select correct option:
Rs. 200,000
Rs. 100,000
Rs. 580,000
Rs. 740,000
Question # 5 of 15 ( Start time: 04:49:09 AM ) Total Marks: 1
Gross pay less deductions represents all except:
Select correct option:
Net pay
Take home pay
Total pay
Other income
Question # 6 of 15 ( Start time: 04:49:42 AM ) Total Marks: 1
Taylor's Differential Piece Rate Plan uses-----------piece rates.
Select correct option:
Three
Two
Four
Five
Question # 7 of 15 ( Start time: 04:49:49 AM ) Total Marks: 1
If computational and record-keeping costs are same under both FIFO and weighted average, which of the following method will generally be preferred?
Select correct option:
Weighted Average
FIFO
Hybrid process
Cannot be determined with so little information
Question # 8 of 15 ( Start time: 04:50:09 AM ) Total Marks: 1
Which of the following is NOT true about job order cost sheets?
Select correct option:
Job cost sheets contain direct material costs
Job cost sheets contain actual amounts of factory overhead
Job cost sheet does not contain conversion cost
Job cost sheets contain direct labor costs
Question # 9 of 15 ( Start time: 04:50:18 AM ) Total Marks: 1
Amount of net purchase can be calculated as follow
Select correct option:
Purchase of direct material add trade discount less purchase return add carriage inward less other material handling cost
Purchase of direct material less trade discount l add purchase return add carriage inward less other material handling cost
Purchase of direct material less trade discount less purchase return less carriage inward add other material handling cost
Purchase of direct material less trade discount less purchase return add carriage inward add other material handling cost
Question # 10 of 15 ( Start time: 04:51:42 AM ) Total Marks: 1
Under/Over applied FOH cost can be adjusted in which of the following:
Select correct option:
Entire Production
Cost of Good sold
Net Profit
All of given options
Question # 11 of 15 ( Start time: 04:51:52 AM ) Total Marks: 1
Which of the following is considered as basic systems of remunerating labor?
Select correct option:
Time rate system
Piece rate system
Halsey Premium plan
Both time rate and piece rate system
Question # 12 of 15 ( Start time: 04:52:08 AM ) Total Marks: 1
Reduction of labor turnover, accidents, spoilage, waste and absenteeism are the results of which of the following wage plan?
Select correct option:
Piece rate plan
Time rate plan
Differential plan
***** bonus system
Question # 13 of 15 ( Start time: 04:52:50 AM ) Total Marks: 1
A chemical process has normal wastage of 5% of input. In a period, 3,500 Kg of material were input and there was no abnormal loss. What quantity of good production was achieved?
Select correct option:
2,175 Kg
2,250 Kg
3,325 Kg
4,425 Kg
Question # 14 of 15 ( Start time: 04:52:59 AM ) Total Marks: 1
Which of the following is correct?
Select correct option:
Units sold=Opening finished goods units + Units produced – Closing finished goods units
Units Sold = Units produced + Closing finished goods units - Opening finished goods units
Units sold = Sales + Average units of finished goods inventory
Units sold = Sales - Average units of finished goods inventory
Question # 15 of 15 ( Start time: 04:53:06 AM ) Total Marks: 1
A high inventory turnover may indicate:
Select correct option:
An efficient use of the investment in inventory
A high risk of stock-outs
Stock position of store room
All of the given options
Question # 1 of 15 ( Start time: 05:09:38 AM ) Total Marks: 1
If a predetermined FOH rate is not applied and the volume of production is reduced from the planned capacity level, the cost per unit expected to:
Select correct option:
Remain unchanged for fixed cost and increase for variable cost
Increase for fixed cost and remain unchanged for variable cost
Increase for fixed cost and decrease for variable cost
Decrease for both fixed and variable costs
Question # 2 of 15 ( Start time: 05:10:01 AM ) Total Marks: 1
Period costs are
Select correct option:
Expensed when the product is sold
Included in the cost of goods sold
Related to specific Period
Not expensed
Question # 3 of 15 ( Start time: 05:10:18 AM ) Total Marks: 1
Under/Over applied FOH cost can be adjusted in which of the following:
Select correct option:
Entire Production
Cost of Good sold
Net Profit
All of given options
Question # 4 of 15 ( Start time: 05:10:25 AM ) Total Marks: 1
FOH absorption rate is calculated by the way of
Select correct option:
Estimated FOH Cost/Direct labor hours
Estimated FOH Cost/No of units produced
Estimated FOH Cost/Prime Cost
All of the given options
Question # 5 of 15 ( Start time: 05:10:43 AM ) Total Marks: 1
The abbreviation LIFO is:
Select correct option:
Large integrated financial organization
Least interesting financial option
The last in first out method
None of the given options
Question # 6 of 15 ( Start time: 05:11:05 AM ) Total Marks: 1
Weighted average cost per unit is calculated by which of the following formula?
Select correct option:
Cost of goods issued/number of units issued
Total cost/total units
Cost of goods manufactured/closing units
Cost of goods sold/total units
Question # 7 of 15 ( Start time: 05:11:13 AM ) Total Marks: 1
A Blanket Rate is:
Select correct option:
A single rate which used throughout the organisation departments A double rates which used throughout the organisation departments
A single rates which used in different departments of the organisation
None of the given options
Question # 8 of 15 ( Start time: 05:11:20 AM ) Total Marks: 1
A worker is paid Rs. 0.50 per unit and he produces 18 units in 7 hours. Keeping in view the piece rate system, the total wages of the worker would be:
Select correct option:
18 x 7 x 0.50 = Rs. 63
18 x 0.50 = Rs. 9
18 x 7 = Rs. 126
7 x 0.5 = Rs. 3.5
Question # 9 of 15 ( Start time: 05:11:39 AM ) Total Marks: 1
Which of the following is indirect cost?
Select correct option:
The depreciation of machinery
The overtime premium incurred at the specific request of a customer
The hire of tools for a specific job
All of the given options
Question # 10 of 15 ( Start time: 05:11:51 AM ) Total Marks: 1
Factory Over head cost includes
Select correct option:
Factory Rent
Property Tax
Salaries of Factory Clerk
All of the given
Question # 11 of 15 ( Start time: 05:11:59 AM ) Total Marks: 1
Manufacturing entities classified the inventory in which of three kinds?
Select correct option:
Material inventory,WIP inventory,Finished goods inventory
Material inventory,purchased good inventory,WIP inventory
Material inventory,purchased good inventory,Finished goods inventory
WIP inventory,Finished goods inventory,purchased good inventory
Question # 12 of 15 ( Start time: 05:12:10 AM ) Total Marks: 1
Which of the following is a mechanical device to record the exact time of the workers?
Select correct option:
Clock Card
Store Card
Token System
Attendance Register
Question # 13 of 15 ( Start time: 05:12:45 AM ) Total Marks: 1
Merrick Differential Piece Rate System:
Select correct option:
worker is not penalized even if his performance does not exceed 80 per cent of the High Task.
worker is not penalized even if his performance does not exceed 70 per cent of the High Task.
worker is not penalized even if his performance does not exceed 50 per cent of the High Task.
worker is not penalized even if his performance does not exceed 30 per cent of the High Task.
Question # 14 of 15 ( Start time: 05:12:53 AM ) Total Marks: 1
_______ are future costs that effect the current management decision.
Select correct option:
Sunk Cost
Standard Cost
Relevant Cost
Irrelevant Cost
Question # 15 of 15 ( Start time: 05:13:00 AM ) Total Marks: 1
Which of the following statement is TRUE about FOH applied rates?
Select correct option:
They are used to control overhead costs
They are based on actual data for each period
They are predetermined in advance for each period
None of the given
If a predetermined FOH rate is not applied and the volume of production is reduced from the planned capacity level, the cost per unit expected to:
Select correct option:
Remain unchanged for fixed cost and increase for variable cost
Increase for fixed cost and remain unchanged for variable cost
Increase for fixed cost and decrease for variable cost
Decrease for both fixed and variable costs
Question # 2 of 15 ( Start time: 05:10:01 AM ) Total Marks: 1
Period costs are
Select correct option:
Expensed when the product is sold
Included in the cost of goods sold
Related to specific Period
Not expensed
Question # 3 of 15 ( Start time: 05:10:18 AM ) Total Marks: 1
Under/Over applied FOH cost can be adjusted in which of the following:
Select correct option:
Entire Production
Cost of Good sold
Net Profit
All of given options
Question # 4 of 15 ( Start time: 05:10:25 AM ) Total Marks: 1
FOH absorption rate is calculated by the way of
Select correct option:
Estimated FOH Cost/Direct labor hours
Estimated FOH Cost/No of units produced
Estimated FOH Cost/Prime Cost
All of the given options
Question # 5 of 15 ( Start time: 05:10:43 AM ) Total Marks: 1
The abbreviation LIFO is:
Select correct option:
Large integrated financial organization
Least interesting financial option
The last in first out method
None of the given options
Question # 6 of 15 ( Start time: 05:11:05 AM ) Total Marks: 1
Weighted average cost per unit is calculated by which of the following formula?
Select correct option:
Cost of goods issued/number of units issued
Total cost/total units
Cost of goods manufactured/closing units
Cost of goods sold/total units
Question # 7 of 15 ( Start time: 05:11:13 AM ) Total Marks: 1
A Blanket Rate is:
Select correct option:
A single rate which used throughout the organisation departments A double rates which used throughout the organisation departments
A single rates which used in different departments of the organisation
None of the given options
Question # 8 of 15 ( Start time: 05:11:20 AM ) Total Marks: 1
A worker is paid Rs. 0.50 per unit and he produces 18 units in 7 hours. Keeping in view the piece rate system, the total wages of the worker would be:
Select correct option:
18 x 7 x 0.50 = Rs. 63
18 x 0.50 = Rs. 9
18 x 7 = Rs. 126
7 x 0.5 = Rs. 3.5
Question # 9 of 15 ( Start time: 05:11:39 AM ) Total Marks: 1
Which of the following is indirect cost?
Select correct option:
The depreciation of machinery
The overtime premium incurred at the specific request of a customer
The hire of tools for a specific job
All of the given options
Question # 10 of 15 ( Start time: 05:11:51 AM ) Total Marks: 1
Factory Over head cost includes
Select correct option:
Factory Rent
Property Tax
Salaries of Factory Clerk
All of the given
Question # 11 of 15 ( Start time: 05:11:59 AM ) Total Marks: 1
Manufacturing entities classified the inventory in which of three kinds?
Select correct option:
Material inventory,WIP inventory,Finished goods inventory
Material inventory,purchased good inventory,WIP inventory
Material inventory,purchased good inventory,Finished goods inventory
WIP inventory,Finished goods inventory,purchased good inventory
Question # 12 of 15 ( Start time: 05:12:10 AM ) Total Marks: 1
Which of the following is a mechanical device to record the exact time of the workers?
Select correct option:
Clock Card
Store Card
Token System
Attendance Register
Question # 13 of 15 ( Start time: 05:12:45 AM ) Total Marks: 1
Merrick Differential Piece Rate System:
Select correct option:
worker is not penalized even if his performance does not exceed 80 per cent of the High Task.
worker is not penalized even if his performance does not exceed 70 per cent of the High Task.
worker is not penalized even if his performance does not exceed 50 per cent of the High Task.
worker is not penalized even if his performance does not exceed 30 per cent of the High Task.
Question # 14 of 15 ( Start time: 05:12:53 AM ) Total Marks: 1
_______ are future costs that effect the current management decision.
Select correct option:
Sunk Cost
Standard Cost
Relevant Cost
Irrelevant Cost
Question # 15 of 15 ( Start time: 05:13:00 AM ) Total Marks: 1
Which of the following statement is TRUE about FOH applied rates?
Select correct option:
They are used to control overhead costs
They are based on actual data for each period
They are predetermined in advance for each period
None of the given
Question # 1 of 15 ( Start time: 05:21:06 AM ) Total Marks: 1
The FIFO inventory costing method (when using a perpetual inventory system) assumes that the cost of the earliest units purchased is allocated in which of the following ways?
Select correct option:
First to be allocated to the ending inventory
Last to be allocated to the cost of goods sold
Last to be allocated to the ending inventory
First to be allocated to the cost of good sold
Question # 2 of 15 ( Start time: 05:21:14 AM ) Total Marks: 1
If computational and record-keeping costs are same under both FIFO and weighted average, which of the following method will generally be preferred?
Select correct option:
Weighted Average
FIFO
Hybrid process
Cannot be determined with so little information
Question # 3 of 15 ( Start time: 05:21:21 AM ) Total Marks: 1
Which of the following would be considered a major aim of a job order costing system?
Select correct option:
To determine the costs of producing each job or lot
To compute the cost per unit
To include separate records for each job to track the costs
All of the given options
Question # 4 of 15 ( Start time: 05:22:08 AM ) Total Marks: 1
A cost unit is
Select correct option:
The cost per hour of operating a machine
The cost per unit of electricity consumed
A unit of product or services in relation to which costs are ascertained
A measure of work output in a standard hour
Question # 5 of 15 ( Start time: 05:22:28 AM ) Total Marks: 1
If, COGS = Rs. 50,000 GP Margin = 25% of sales What will be the value of Sales?
Select correct option:
Rs. 200,000
Rs. 66,667
Rs. 62,500
None of the given options
Question # 6 of 15 ( Start time: 05:22:48 AM ) Total Marks: 1
Which of the following is/are reported in production cost report?
Select correct option:
The costs charged to the department
How the costs were assigned to the output?
The equivalent units of production by the department
All of the given options
Question # 7 of 15 ( Start time: 05:22:59 AM ) Total Marks: 1
Under/Over applied FOH cost can be adjusted in which of the following:
Select correct option:
Entire Production
Cost of Good sold
Net Profit
All of given options
Question # 8 of 15 ( Start time: 05:23:07 AM ) Total Marks: 1
Gross pay less deductions represents all except:
Select correct option:
Net pay
Take home pay
Total pay
Other income
Question # 9 of 15 ( Start time: 05:23:13 AM ) Total Marks: 1
Which of the following is/are reasons of abnormal loss?
Select correct option:
Defective material used
Machine breakdown
Poor workmanships
All of the given
Question # 10 of 15 ( Start time: 05:23:21 AM ) Total Marks: 1
If, Gross profit = Rs. 40,000 GP Margin = 25% of sales What will be the value of cost of goods sold?
Select correct option:
Rs. 160,000
Rs. 120,000
Rs. 40,000
Can not be determined
Question # 11 of 15 ( Start time: 05:23:37 AM ) Total Marks: 1
Weighted average cost per unit is calculated by which of the following formula?
Select correct option:
Cost of goods issued/number of units issued
Total cost/total units
Cost of goods manufactured/closing units
Cost of goods sold/total units
Question # 12 of 15 ( Start time: 05:23:43 AM ) Total Marks: 1
Which of the following statement is TRUE about FOH applied rates?
Select correct option:
They are used to control overhead costs
They are based on actual data for each period
They are predetermined in advance for each period
None of the given
Question # 13 of 15 ( Start time: 05:24:01 AM ) Total Marks: 1
Which of the following statement is correct regarding reasons of variance?
Select correct option:
Difference between capacity level over which overhead absorption rate is calculated & capacity level attained.
Difference between FOH cost budgeted or estimated over which overhead absorption rate and FOH actually incurred.
Diffrence between the actual level which company achived and budget level which company determined.
All of the given
Question # 14 of 15 ( Start time: 05:24:53 AM ) Total Marks: 1
In which of the following center FOH cost NOT incurred
Select correct option:
Production Center
Service Center
General Cost Center
Head Office
Question # 15 of 15 ( Start time: 05:25:25 AM ) Total Marks: 1
The Term Maximum Level Represents:
Select correct option:
The maximum stock level indicates the maximum quantity of an item of material which can be held in stock at any time.
The maximum stock level indicates the maximum quantity of an item of material which cannot be held in stock at any time.
The Average stock level indicates the maximum quantity of an item of material which can be held in stock at any time.
The Available stock level indicates the maximum quantity of an item of material which can be held in stock at any time.
The FIFO inventory costing method (when using a perpetual inventory system) assumes that the cost of the earliest units purchased is allocated in which of the following ways?
Select correct option:
First to be allocated to the ending inventory
Last to be allocated to the cost of goods sold
Last to be allocated to the ending inventory
First to be allocated to the cost of good sold
Question # 2 of 15 ( Start time: 05:21:14 AM ) Total Marks: 1
If computational and record-keeping costs are same under both FIFO and weighted average, which of the following method will generally be preferred?
Select correct option:
Weighted Average
FIFO
Hybrid process
Cannot be determined with so little information
Question # 3 of 15 ( Start time: 05:21:21 AM ) Total Marks: 1
Which of the following would be considered a major aim of a job order costing system?
Select correct option:
To determine the costs of producing each job or lot
To compute the cost per unit
To include separate records for each job to track the costs
All of the given options
Question # 4 of 15 ( Start time: 05:22:08 AM ) Total Marks: 1
A cost unit is
Select correct option:
The cost per hour of operating a machine
The cost per unit of electricity consumed
A unit of product or services in relation to which costs are ascertained
A measure of work output in a standard hour
Question # 5 of 15 ( Start time: 05:22:28 AM ) Total Marks: 1
If, COGS = Rs. 50,000 GP Margin = 25% of sales What will be the value of Sales?
Select correct option:
Rs. 200,000
Rs. 66,667
Rs. 62,500
None of the given options
Question # 6 of 15 ( Start time: 05:22:48 AM ) Total Marks: 1
Which of the following is/are reported in production cost report?
Select correct option:
The costs charged to the department
How the costs were assigned to the output?
The equivalent units of production by the department
All of the given options
Question # 7 of 15 ( Start time: 05:22:59 AM ) Total Marks: 1
Under/Over applied FOH cost can be adjusted in which of the following:
Select correct option:
Entire Production
Cost of Good sold
Net Profit
All of given options
Question # 8 of 15 ( Start time: 05:23:07 AM ) Total Marks: 1
Gross pay less deductions represents all except:
Select correct option:
Net pay
Take home pay
Total pay
Other income
Question # 9 of 15 ( Start time: 05:23:13 AM ) Total Marks: 1
Which of the following is/are reasons of abnormal loss?
Select correct option:
Defective material used
Machine breakdown
Poor workmanships
All of the given
Question # 10 of 15 ( Start time: 05:23:21 AM ) Total Marks: 1
If, Gross profit = Rs. 40,000 GP Margin = 25% of sales What will be the value of cost of goods sold?
Select correct option:
Rs. 160,000
Rs. 120,000
Rs. 40,000
Can not be determined
Question # 11 of 15 ( Start time: 05:23:37 AM ) Total Marks: 1
Weighted average cost per unit is calculated by which of the following formula?
Select correct option:
Cost of goods issued/number of units issued
Total cost/total units
Cost of goods manufactured/closing units
Cost of goods sold/total units
Question # 12 of 15 ( Start time: 05:23:43 AM ) Total Marks: 1
Which of the following statement is TRUE about FOH applied rates?
Select correct option:
They are used to control overhead costs
They are based on actual data for each period
They are predetermined in advance for each period
None of the given
Question # 13 of 15 ( Start time: 05:24:01 AM ) Total Marks: 1
Which of the following statement is correct regarding reasons of variance?
Select correct option:
Difference between capacity level over which overhead absorption rate is calculated & capacity level attained.
Difference between FOH cost budgeted or estimated over which overhead absorption rate and FOH actually incurred.
Diffrence between the actual level which company achived and budget level which company determined.
All of the given
Question # 14 of 15 ( Start time: 05:24:53 AM ) Total Marks: 1
In which of the following center FOH cost NOT incurred
Select correct option:
Production Center
Service Center
General Cost Center
Head Office
Question # 15 of 15 ( Start time: 05:25:25 AM ) Total Marks: 1
The Term Maximum Level Represents:
Select correct option:
The maximum stock level indicates the maximum quantity of an item of material which can be held in stock at any time.
The maximum stock level indicates the maximum quantity of an item of material which cannot be held in stock at any time.
The Average stock level indicates the maximum quantity of an item of material which can be held in stock at any time.
The Available stock level indicates the maximum quantity of an item of material which can be held in stock at any time.
CS504 Software Engineering Quizzes
ReplyDeletehttp://vukwl.blogspot.com/2018/07/cs504-software-engineering-quizzes-file_15.html